AFF | Awesome Fun Facts

Here is the most easy way to strengthen your WIFI signal using a SODA Can. This method has been proven to improve Wi-Fi reception from around 2 bars to about 4 on average, varying between 3 and 5. Give it a go – all you’ve got to waste is a soda can!

Step 1 : Gather the required materials and tools. Soda Can , cutter, Scissor, and adhesive.

Step 2 : Clean the soda can and  pull-off its ring.

Step 3 : Cut the end off the beer can where there’s no opening. Do this using the Stanley knife or similar suitable safety knife

.

Step 4 : Cut around the end with the opening almost all the way. Leave a little bit of metal to keep attached the part that will be the base (see the white line in the illustration).

Step  5 : Cut along the middle of the can in a straight line, opposite to the piece of metal attaching the base.

Step  6 : Being careful, open up the middle piece of metal by bending it until it vaguely resembles the shape of a radar dish.

Step 7 : Place the completed Wi-Fi booster on your router. Place it so that the antenna pokes through the opening, and stick the base of the can to the router with a small piece of poster tack or other suitable adhesive. It’s time to test how much your Wi-Fi is now boosted!